23 MW Frame 5 N (PG5341) 50/60Hz gas turbine generator for sale 
Diesel (3 available)

$9.5 Million for all 3 units

Package of  turbines with gear boxes between turbines and generator, open cycle and on common 10.5/100kV transformer.   Can easily be converted from 50Hz. to 60Hz.  Presently running on diesel and can be convert to run on gas.  One package of 3 units together with a steel foundation for the 3 bundled flue gas stacks with inserted air intake and flue gas channels.  Feasible to add on heat recovery boiler each.   These are outdoor units, nice outside - no rust,  no bad doors, dents etc.   These are extremely clean units.   Basic stock of mechanical and electrical spare and wear  parts available.  The turbine was manufactured was AEG-Kanis.  The compressors, turbine rotors, nozzles, buckets, blades, and vains were supplied by GE USA.   The equipment  is in Europe and for sale "as is, where is."  The units have less than 1,200 hours and 900 starts.   Starting means: 500HP diesel engines with electric starter.  The turbines were manufactured in 1974 and are still in standby use.

Cost to convert to duel fuel approximately $150,000 each.  Cost for dismantling and packing approximately $600,000 for all three.

Turbine:

Power (ISO) Base load    23,100 kW
Peak load   24,950 kW
Heat Rate (ISO) Base load  13,197/12,513 kJ(BTU)/kWhr.
Peak load 12,904/12,236 kJ(BTU)/kWhr.
Fuel Oil / Gas (Currently running on Oil)
Exhaust Temp Peak load  510 C
Exhaust Flow Peak load 114.8 kg/sec
Control System Mark I
Turbine Speed 5,100 rpm

Generator:

Manufacturer Rade Concar
Model S1606-2
Power 28MVA
Voltage 10.5 kV
Frequency 50 Hz.
Speed 3,000 rpm
Power Factor 0.80

Contact Milt Fyre for more details.
Phone: 503-239-5157
Fax: 503-239-5136
milt@rmaglobal.com
Return to Main Entrance


sales@rmaglobal.com  Phone: (503) 239-5157   Fax: (503) 239-5136   Copyright 1995-2003: RMA Inc.