LM2500 Gas turbine generator

26 MW LM2500 Gas Turbine Generator. New gas turbine.
Good Operating Condition. As is, where is.
$6.5 Million (USD)

(LM2500 Gas Turbine Generator Images: click here!)

LM 2500 - SCOPE OF SUPPLY

A. LM2500 -BASIC SCOPE OF SUPPLY

LM2500 PE gas turbine engine (new and unused) equipped with inlet bellmouth and screen.

Liquid fuel system, complete and self-contained on the unit, with connection on the baseplate for customer of filtered distillate fuel at 600psig

Natural Gas fuel system, with connection on the baseplate for customer's filtered, regulated fuel supply at 400 psig * 20 psig. (requires field installation of gas metering and block valves, not Included.

GE Generator, 26471 KVA iso rated, 13,800 Volt, 60 Hz, 3600 RPM, air cooled with GE excitation system and voltage regulator. Neutral and line cubicles with CTs, surge protectors and lightning arrestors.

I-beam baseplates for turbine, generator and unit mounted accessories.

Acoustic enclosure for gas turbine and generator. Ventilation systems, and AC internal lighting .

Air inlet filtration system for both gas turbine and generator

Electro-hydraulic start system.

Separate oil systems for gas turbine and generator, including duplex filters, duplex water/oil coolers

GE Mark V Unit control panel for indoor mounting in a controlled environment, including microprocessor fuel management and sequencing system, generator metering, vibration monitoring, CRT annunciation of alarms and shutdowns, and Ethernet/Modbus interface to buyer's DCS.

I/O cubicle mounted on gas turbine enclosure.

24V DC control system battery with dual battery chargers.

Fire and gas detection and extinguishing system for turbine compartments, complete with DC battery and charger.

"Soak wash" engine cleaning system.

Three sets of LM2500 gas turbine O&M manuals

LM2500 familiarization / basic operator training course at GE factory.
 
B.	LM2500 OPTIONAL EQUIPMENT AND SERVICES
		   (I) included in base price    (S) Quoted separately
(   )	Option A - 50 Hz generator and associated unit AC devices
(   )	Option B - Alternate voltage or power factor             KV @             pf
(   )	Option C - Water cooled generator (TEWAC) for >85°F cooling water
(   )	Option D - Fin-Fan oil coolers
(   )	Option E - Alternate side location for piping connections and turbine removal
(   ) 	Option F - Alternate side termination, lineside & neutral cubicles
(   )	Option G -Synchronous Condenser Capability
( I ) 	Option H - Dual fuel system
( I )  	Option I -	Water injection metering system (NOx control with gaseous fuel system)                          
(   )   	Option J -  Sprint (Spray Intercooling) Power Boost System 
(   )  	Option K - Steam injection metering system (NOx control with gaseous fuel system  only)
(   )  	Option L -	Dry, Low Emissions (DLE) (NOx, CO and HC control without water or  steam injection…..available 
	for gaseous fuel only)
( I )  	Option M - Evaporative cooling, MEE Fog design     
(   )  	Option N - Inlet Air Anti-Ice System  
(   )	Option O - Inlet Air Chilling Coil 
( I )  	Option P - Exhaust Assembly includint GE flow enhancer to reduce back pressure turning elbow and 50 ft stack
(   )  	Option Q - Winterization Package 
(   )  	Option R - Black Start System
( I )   	Option S  -Prewired 41 ft Modular Control Room, housing Unit control panel,  generator breaker and Unit Motor 
	Control centre
( I )  	Option T - 15 KV generator breaker assembly,  synchronization controls and generator protective relays
( I )  	Option U - Unit Motor Control Center
( S )  	Option V - Step up Transformer
	EXCLUSIONS
            The items listed below are excluded from our offering.  Any other equipment or
            services not specifically listed in the scope of supply are also excluded.
-	Fuel, fluids and chemicals
-	Fuel storage tanks and forwarding equipment
-	Water treatment and purification equipment
-	Deaeration and chemical injection equipment
-	Buildings, foundations and foundation embedments
-	Filter house support structure other than standard
-	High voltage switchgear and associated equipment
-	Distributed plant control or remote control panels
-	Balance of plant and energy optimization controls
-	Cooling tower and circulating water system
-	Interconnecting piping, conduit, and wiring between equipment modules
-	Power plant calibration tools and ordinary hand tools
-	Off loading of equipment at jobsite
-	Yard light and fences
-	Spare parts other than start-up spares
-           	Supervision or technical direction at jobsite for startup
(LM2500 Gas Turbine Generator Images: click here!)

Contact Milt Fyre for more details.
Email: milt@rmaglobal.com

Return to Main Index