2000kW CAT 3516 DITA Diesel Generator Sets 60Hz.  Enclosed  
2 Each Available  

Contact Pete Hoffman 503-595-5418 or pete@rmaglobal.com 

(Click here for images.)

Quantity 2 – 2000kW - 3516 DITA - Year 2001 - Zero hrs - Enclosed, Sound Attenuated

Caterpillar Model 3516B DITA

Zero run hours, Unit is new surplus stock

2000EKW with Fan, 2876 HP, 1800 RPM, 60 HZ,

Separate Circuit After Cooler, 4 Turbocharger, Dry Manifold, Direct Injected,

Stand By Rated, 480 Volt, .8 Power Factor

Engine manufactured 12-20-2000, package model year of 2001

Enclosed in a sound attenuated, skid base enclosure  

Features and Accessories for the unit includes:

 Air Inlet System

Air cleaner, regular duty, with service indicators
After Cooler
Two turbochargers - center mounted

Two turbochargers - rear mounted

Control System

ADEM~ Electronic engine control

Load share module  

 Cooling System

Blower fan, fan drive, and fan guard

Engine-jacket water coolant thermostats, full open temperature 198° F.

Jacket water pump, gear driven, centrifugal

Split core, two circuit, engine jacket water and after cooler water

After cooler water pump, gear driven, centrifugal

After cooler cooling pump circuit contains thermostat to keep after cooler water from falling below

85 degree F.

Coolant loss sensor

Antifreeze  

 Exhaust System

Exhaust manifold, dry, dual 8 inches

Four turbo arrangement - center mounted  

 Fuel System

Fuel oil cooler

Fuel filter RH - spin on

Flexible fuel lines

Fuel transfer pump

150 Gallon Double Wall Day Tank  

 Generator and Generator Attachments

827 frame Type SR4B

Permanent magnet

Generator arrangement 144-1828

480V, 3 phase, 0.8 power factor, 4 Pole

Rated 2000 kW standby

Series Star connection

2 Bearing

Form Wound

6 Lead, 8 Wires per lead

.6667 Pitch

Capable of 1825KW @ .8PF

Digital voltage regulator  

 Instrumentation

EMCP II + control panel including:

24 Volt DC Control

NEMA 1, IP44 Dust Proof Enclosure

Lockable hinged door

Generator Terminal Box

Single location customer connection

Panel illuminating lights

Auto start/stop control switch

Voltage adjustment potentiometer

True RMS AC metering, 3 phase  

Digital indication for:

RPM

Operating hours

Oil pressure

Coolant temperature

DC Volts

Line to Line Volts, Line to Neutral Volts, Phase, Amps, Hz

eKW, KVa, kVAR, kWhr, % KW, PF

Shutdowns with indicating lights for:

Low oil pressure

High coolant temperature

Over speed

Emergency stop

Failure to start (over crank)

Low coolant level

Programmable Protective Relaying Functions

Under and Over Voltage

Under and Over Frequency

Reverse Power

Over Current (phase and Total)

3 Spare indicating LED's (programmable)

4 Spare Alarm/Shutdown Inputs

Provides dry contacts for the following conditions for customer use:

Low/high coolant temperature alarm

High coolant temperature shutdown

Low oil pressure alarm

Low oil pressure shutdown

Over crank and over speed shutdown

EMCP shutdown

Panel Lights/Auxiliary Relay

Provides 3 pole double throw 6-10 amp relay contacts for customer use and two lights with an On / off switch.  

 Lube System

Oil pump - gear type

Crankcase breather, top mounted

Oil cooler (mounted on radiator)

Oil filter RH

Shallow oil pan

Oil filler and dipstick 

Oil pan drain valve

Lubricating oil SAE 15W40  

Crankcase explosion relief valve

 Starting System

Dual 24 volt electric starting motors

Caterpillar group 4D batteries

LaMarche 1 pc. Model A46-20-24V-Al with 16E alarm package  

 Starting Aids

Dual jacket water heater,  kW total, 120-240V single phase, fixed thermostat 140 degree .

 Enclosure w/ Skid Base Custom manufactured by International Supply Company

            Meets Dade County Florida, 2001, 110 MPH wind load requirements

            75 DBA @ 75’

 

Enclosure dimensions are  158.5” high, 144” wide, 474” long, 84,000 Lbs. weight

                        Discharge hood is 130” high, 88” wide, 144” long, 2500 Lbs. weight


The Following Accessories will Be Supplied loose for the unit.

Discharge hood

Qty. 10 pc. PIN 822-K Seismic Vibration Isolators


This does not include any warranty from D&M Electrical or factory warranty.  Although, a warranty package may be purchased from Caterpillar at any additional cost.

-----     END   ------

 

Contact Milt Fyre    milt@rmaglobal.com

Email: sales@rmaglobal.com   Phone: (503) 595-5418   Fax: (503) 635-0091   Copyright 1995-2007: RMA Inc.