11MW Frame 5D Gas Turbine Generator and Station Equipment
60Hz.  Natural Gas Only
For Sale

Unit Description:  Installed 1961 for peaking operation.  1040 starts and 4260 total hours.

One simple cycle, single shaft gas turbine, Fuel: Pipeline Gas only.  Frame: 5000 D 

The gas turbine/generator assembly consists of:

GE Frame 5000 D gas turbine with all required auxiliary components.
GE Shaft Driven Exciter with all required auxiliary components, including field breaker and associated controls.
GE Air cooled generator with all required auxiliary components, including all associated PTs, CTs and related relaying/metering devices.
GE Generator Step Up Transformer, including all associated PTs, CTs and related relaying/metering devices
Original Electrical-Hydraulic control system since slightly modified with two Honeywell key parameter controllers.
All manuals, drawings and inspection reports available.

Name Plate Rating:    Load: 11,150 KW    Speed: 4860 RPM    Compressor: 16 Stages - Inlet temp at 80 deg.F - Inlet Pressure @ 14.7 psia
Turbine: 2 Stages - Exhaust temp at 880 deg. F - Exhaust Pressure @ 14.7 psia

Starting Engine:    Cummins VT-903   430 HP at 2500 RPM

Turbine:   Type: A-400-A    Rating: 217 HP    Shafts Speed Ratio: 4860, 3598, 1308, 4381 RPM

Reduction Gear:    Type: S-385-A   Rating: 1600 kW    Ratio: 4860/3600

Generator:   Type: ATB-2 (Air Cooled)    Rating: 13,529 KVA @ 0.85 PF   Volts: 13,800 volts, 3 Phase, 60 cycle  Stator Amps: 566   Field Amps: 261

Exciter:   Type: EDF-4   Rating: 40 KW, 3600 RPM, 125 volts

Main GSU Transformer:    GE OA/FA/FOA    Rating: 22.5 MVA.      Voltage: 13.2 -115 KV

Contact Milt Fyre    milt@rmaglobal.com

Email: sales@rmaglobal.com   Phone: (503) 595-5418   Fax: (503) 635-0091   Copyright 1995-2008: RMA Inc.