1.7 MW HYUNDAI ENGINE GENERATOR SETS FOR SALE
4 units for sale
New Surplus available for immediate delivery
HFO  60Hz.
For Price Contact
milt@rmaglobal.com  503-595-5418  Cell 503-351-9898


GENERAL DESCRIPTION

4 x 1700kW power module packaged in 40ft container made by Hyundai Heavy Industry Co., Ltd driven by Hyundai Himsen engine Engine model: 9H21/32 - 9 cylinder in line.   Bore; 210mm, Stroke; 320mm . 4 stroke, single acting trunk piston diesel engine with turbocharger and intercooler.

All units are 1700 kW Continuous , 2127kVA, 4,160 volt, 60HZ at 900rpm. 2007 Models New / un-used and does not come with cooling system.    Control panel. Fuel: LDO #1 or HFO #6.    Fuel tank:8 hour fuel tank.     Life time: more than 20 years.    Weight : 40 Ton Plus freight charges. 


GENERAL SPECIFICATION

Description Specification
Diesel Engine Type 9H 21/32
Engine Output 1800kW
Generator Output 1701kW
Speed 900rpm
Frequency 60Hz
Voltage 4160V AC, 3Ph
Fuel Oil Light fuel oil for starting

Heavy fuel oil for normal operation

Cooling Radiator Cooling

 

SITE AMBIENT CONDITION
- Air temperature (Blower inlet) : 32 °C
- Altitude : 10 m above mean sea level
- Cooling water temperature : 40 °C
- Cooling system : Radiator Cooling
- Relative humidity : max. 90 %

PERFORMANCE DATA AT ISO CONDITION
- Gross Output at Generator Terminal : 1,701 kW/unit
- Fuel consumption at Generator Terminal : 200 g/kWh

Based on ISO 3046 condition
(Tolerance + 5%, LCV= 42,700 kJ/kg, Load 100 %, 60 Hz, PF = 0.8 )

FUEL OIL FOR DIESEL ENGINE
(1) Heavy Fuel Oil with viscosity of max. 380 cSt/50 ?C
for a main fuel of the power plant.

(2) Light diesel oil
for a start-up & stop and maintenance

LUBRICATING OIL FOR DIESEL ENGINE
Lubricating oil type: SAE 40.

COOLING WATER
The cooling water system is designed for using normal fresh water with corrosion inhibitor, in order to prevent encrustation and corrosion attack.
The following water quality shall be valid;

For Engine

- PH value : 7-9
- Chloride content : Max. 50 ppm(mg/liter)
- Sulphate : Max. 100 ppm(mg/liter)
- Silicate : Max. 150 ppm(mg/liter)
- Residue after evaporation : Max. 400 ppm(mg/liter)
- Hardness : Max 10 °dH

 

Contact Milt Fyre    milt@rmaglobal.com

Email: sales@rmaglobal.com   Phone: (503) 595-5418   Fax: (503) 635-0091   Copyright 1995-2008: RMA Inc.