|
|
| Underground
T&D Hardware for Sale |
| Tim Felasco |
| Phone: 315-460-2947 Fax: 315-457-4325 |
|
Email: felasco@nimo.com
|
Return
to Main Sale Page
|
| |
|
|
|
|
| Ref. # |
Quant. |
Price/Unit |
Description |
Manuf./Part # |
| 2010436 |
10 |
5.80 |
ADAPTER, CONDUIT, 6 IN FEMALE, MOLDED FROM GREY PVC IN ACCORDANCE WITH NEMA TC9 AND ASTM F-512, DESIGNED FOR DIRECT BURIAL WITHOUT ENCASEMENT IN CONCRETE, ALSO SUITABLE FOR CONCRETE ENCASEMENT, FOR CONNECTING PVC CONDUIT TO GALVANIZED STEEL CONDUIT |
CARLON E942R SCEPTER FA65 |
| 2012152 |
15 |
81.50 |
ADAPTER, RING, REINFORCED PLASTIC MORTAR SUB- MERSIBLE TO PADMOUNT CONVERSION ADAPTER RING AND ASSOCIATED MOUNTING HARDWARE FOR USE WITH ITEMS UR12F TOP CAP AND UR12G COVER. FOR CON- VERSION OF 48 INCH SUBMERSIBLE ENCLOSURES TO PADMOUNTED INSTALLATIONS. MAINTENANCE WORK ONLY |
q |
| 6010778 |
31 |
15.50 |
ANODE, ZINC 5 LB. BARE (1.4" X 1.4" X 9" LONG) WITH A #8 AWG STR. CU. HIGH MOLECULAR WEIGHT POLYETHYLENE INSULATED (TYPE C.P.) CABLE 6 FT. LONG SILVER BRAZED TO THE 1/4" DIAMETER STEEL CORE. THE BRAZED JUNCTION SHALL BE INSULATED WITH PVC INSULATING TAPE. ( MAINTENANCE WORK ONLY ) |
PCA N/A |
| 1008993 |
24 |
12.00 |
APPLICATOR, PAINT-MARKING, "EASY MARKER" HANDLE WITH GUIDE WHEEL, FOR USE WITH "EASY MARKER" SPRAY CANS OF RED ITEM UP11R OR YELLOW ITEM 7MPY MARKING PAINT |
FOX VALLEY EM-3 SEYMOUR Z-606 |
| 810507 |
1446 |
3.90 |
BOOT, INSULATING, SECONDARY CONNECTOR, CLEAR |
HOMAC ZVW3033-USLRBOOT |
| 2014933 |
30 |
7.80 |
BOOT, INSULATING RUBBER FOR COVERING THE SECONDARY BUSHING AND CABLE TERMINATION ON SINGLE PHASE PAD- MOUNTED TRANSFORMERS, ITEMS UT30A AND UT30B |
HOMAC 2157 |
| 2030353 |
436 |
31.80 |
BOX, ENCLOSURE, FIBERGLASS REINFORCED PLASTIC, 7 1/2 IN X 6 IN X 5 3/16 IN, GREY IN COLOR, UL LISTED, ENCLOSURE SHALL HAVE AN INTERNAL HINGED AND GASKETED COVER AND SHALL BE WATERTIGHT, RAINTIGHT, DUSTIGHT, OILTIGHT AND CORROSION RESISTANT, FURNISHED WITH FOUR SUBPANEL MOUNTING SCREWS |
HOFF ENGR A-865JFG VYNCKIER VJ-606HW VYNCKIER VJ-606HW |
| 2011099 |
10 |
6.90 |
BUSHING, CONDUIT, INSULATED, GROUNDING, 2 IN, PLATED MALLEABLE IRON, THREADED, INSULATED, 150 DEG C RATED, FURNISHED WITH A STAINLESS STEEL OR BRONZE LAY-IN TYPE MECHANICAL CABLE CONNECTOR HAVING A CABLE RANGE OF # 8 THRU # 2/O AWG, WITH A STEEL SET SCREW OR BOLT, IN ACCORDANCE WITH UNDERWRITERS LABORATORIES STANDARD UL467 AND UL486B, TO EFFECTIVELY GROUND STEEL CONDUIT, FOR USE WITH ITEM UK30 |
GE UL467 GE UL486B MIDW ELEC GLL-6-10C O-Z GEDNEY BLG 2022 GOULD ELEX 56-200T-20BC |
| 2014981 |
5 |
76.70 |
BUSHING, DEADBREAK EXTENSION, SHIELDED BUSHING, 15 KV, 600 AMP, USED TO INCREASE THE DISTANCE BETWEEN THE SURFACE OF A PIECE OF APPARATUS AND THE POINT AT WHICH CABLE ENTERS THE 600A DEADBREAK ELBOW ITEM UR60, FURNISHED WITH LOOSE STUD-PACKAGED |
ELASTIMOLD 655BE COOPER PWR 2637837B01M |
| 4026002 |
2400 |
2.60 |
CABLE, PRIMARY, 15KV, UNDERGROUND AND SUBMARINE, SINGLE CONDUCTOR, 60 HZ, SHIELDED THERMOSETTING RUBBER BASE INSULATED ALUMINUM POWER CABLE WITH CONCENTRIC NEUTRAL ARMOR WIRES AND POLYETHYLENE JACKET WITH THREE (3) RED MARKER STRIPES, CABLE SHALL BE IN ACCORDANCE WITH NMPC SSYSTEM SPECIFICATION E-1080, ONE CABLE TO BE FURNISHED ON A REEL, SIZE OF ALUMINUM CONDUCTRO #2 AWG MINIMUM AVGERAGE INSULATION THICKNESS(INCHES) .175, AVERAGE JACKET THICKNESS(INCHES) .110 OD OVER INSULATION (INCHES) .698+-.018 APPROXIMATE OD OVER JACKET(INCHES) 1.24 STANDARD LENGTH PER REEL (FEET) 7000 |
KERITE N/A |
| 4026375 |
2040 |
8.90 |
CABLE, PRIMARY 1/C RUBBER 15 KV 60 HZ SINGLE CONDUCTOR SHIELDED THERMOSETTING RUBBER BASE INSULATED ALUMINUM UNDERGROUND POWER CABLE WITH CONCENTRIC NEUTRAL WIRES AND POLYETHYLENE JACKET CABLE SHALL BE IN ACCORDANCE WITH N.M.P.C SYSTEM SPECIFICATION E-1081. THREE PARALLEL CABLES TO BE FURNISHED ON A REEL. SIZE OF AL. CONDUCTOR 750 KCMIL MIN. AVG. INSUL. THICKNESS (INCHES) .230 AVG. JACKET THICK. (INCHES) .110 O.D. OVER INSUL. (INCHES) 1.49+-.04 APPROX. O.D. OVER JACKET (INCHES) 1.76 STANDARD LENGTH PER REEL (CKT. FT.) 900. |
KERITE N/A |
| 4034002 |
1000 |
14.50 |
CABLE, PRIMARY 1/C RUBBER 35 KV SINGLE-CONDUCTOR 60 HZ, SHIELDED, RUBBER-BASED, INSULATED POWER CABLE WITH 21-#14 AWG BARE COPPER CONCENTRIC NEUTRAL WIRES AND POLYETHYLENE JACKET. THREE PARALLEL CABLES TO BE FURNISHED ON A REEL. CABLE FURNISHED SHALL BE IN ACCORDANCE WITH NMPC SYSTEM SPEC. E-1136. SIZE OF CON- DUCTOR #2/0 AWG CU. MIN. AVG. INSUL. THICKNESS (INCHES) .345, AVG JACKET THICKNESS (INCHES) .110, O.D. OVER INSUL. (INCHES) 1.19 +-.05, APPROX. O.D. OVER CABLE (INCHES) 1.53. STANDARD LENGTH PER REEL (CKT. FT.) 1000. |
KERITE N/A |
| 4034075 |
1472 |
20.90 |
CABLE, PRIMARY 1/C RUBBER 35 KV SINGLE-CONDUCTOR 60HZ, SHIELDED, RUBBER-BASED, INSULATED POWER CABLE WITH 21-#14 AWG BARE COPPER CONCENTRIC NEUTRAL WIRES AND POLYETHYLENE JACKET. THREE PARALLEL CABLES TO BE FURNISHED ON A REEL. CABLE FURNISHED SHALL BE IN ACCORDANCE WITH NMPC SYSTEM SPEC. E-1136. SIZE OF CON- DUCTOR #750 KCMIL CU. MIN. AVG. INSUL. THICKNESS (INCHES) .345, AVG. JACKET THICKNESS (INCHES) .110, O.D. OVER INSUL. (INCHES) 1.80 +-.05, APPROX. O.D. OVER CABLE (INCHES) 2.15. STANDARD LENGTH PER REEL (CKT. FT.) 900. |
KERITE N/A |
| 2014944 |
4 |
12.00 |
CAP, INSULATING LOADBREAK, 200A 15 KV USED FOR INSULATING SHIELDING AND WATER SEALING AN ENERGIZED LOAD BREAK BUSHING PLUG INSERT ITEM UR36. FOR COMPLETE SPECIFICATIONS RE- FER TO N.M.P.C. SYSTEM SPECIFICATION E-1074 |
ELASTIMOLD 160DR COOPER PWR LPC215 CEC INC 9U01AEW400 |
| 2031068 |
473 |
1.50 |
CAP, CABLE END, MOLDED EPDM RUBBER FOR TEMP- ORARY SEALING DE-ENERGIZED CABLE AGAINST MOISTURE AND WATER, DO NOT USE FOR ENERGIZED CABLE, DESIGNED FOR INSTALLATION OVER THE OUTER JACKET OR OVER THE SEMI-CONDUCTING IN- SULATION SHIELD AS APPLICABLE OUTER JACKET OR SEMI-CON INS. SHIELD O.D. (INCHES) MIN 1.465, MAX 1.750 |
HOMAC 135 |
| 2031070 |
1357 |
1.90 |
CAP, CABLE END, MOLDED EPDM RUBBER FOR TEMP- ORARY SEALING DE-ENERGIZED CABLE AGAINST MOISTURE AND WATER, DO NOT USE FOR ENERGIZED CABLE, DESIGNED FOR INSTALLATION OVER THE OUTER JACKET OR OVER THE SEMI-CONDUCTING IN- SULATION SHIELD AS APPLICABLE OUTER JACKET OR SEMI-CON INS SHIELD O.D. (INCHES) MIN 2.150 MAX 2.500 |
HOMAC 155 |
| 3503067 |
7 |
115.60 |
CLAMP, CONDUIT GROUND, 6 IN, HEAVY DUITY, CORROSION RESISTANT WITH SILICONE BRONZE HARDWARE, FURNISHED WITH A MECHANICAL GROUNDING CABLE CONNECTOR PERMITTING THE GRONDING CABLE TO BE ATTACHED EITHER PARALLEL WITH OR AT RIGHT ANGLES TO THE STEEL CONDUIT HAVING A CABLE RANGE OF # 4 SOLID TO # 4/O STRANDED AWG, IN AC- CORDANCE WITH UNDERWRITERS LABORATORIES STANDARDS TO EFFECTIVELY GROUND STEEL CONDUIT, FOR USE WITH ITEM UK30, |
THOMAS&BET 3906-BU |
| 2010295 |
100 |
0.90 |
CLOSURE, STRIP PVC "H" STYLE 1 1/2 IN WIDE 1/4 IN GAP FOR USE IN REPAIRING PVC CONDUIT CLOSURE STRIP SHALL BE FURNISHED IN 10 FOOT LENGTHS (DNO - USE UP EXISTING STOCK) |
q |
| 8008090 |
377 |
15.70 |
COMPOUND, FIRE STOP, SEALING PRE-MIXED PUTTY CONSISTEN- CY NON-HARDENING, TAN IN COLOR, PACKAGED IN 1"X 3" X 12" BARS, AIR AND SMOKE TIGHT, WEATHER RESISTANT FIRE STOP MATERIAL, FOR USE IN SEALING CONDUITS, WALLS AND FLOOR OPENINGS TO PREVENT THE SPREAD OF FIRE, SMOKE AND/OR TOXIC GASES AND TO RESTORE FIRE RATED WALL AND FLOOR INTEGRITY, UL STANDARD FOR 3 HOUR FIRE RATING UP TO 3 HOUR COLD SIDE TEMPERATURE RATING, PACKAGED 10 BARS PER CASE |
NELSON AA445 |
| 2011296 |
4 |
81.20 |
CONDUIT, STEEL, BELL END, 6 IN, HOT DIP GALVANIZED MALLEABLE IRON THREATED BELL END, TO PROVIDE A SMOOTH ROUNDED PULLING SURFACE, IN ACCORDANCE UNDERWRITERS LABORATORIES STANDARDS, FURNISHED WITH GALVANIZED OR ZINC COATED THREADS (8 THREADS PER IN), FOR USE WITH ITEM UK30 |
O-Z GEDNEY TNS 600 |
| 2014022 |
75 |
4.00 |
CONNECTOR, STRAIGHT SPLICE SPLIT SOLDER TINNED COPPER TAPERED ENDS DESIGNED FOR JOINING COPPER CABLES END TO END, FOR USE ON VOLTAGES OF 46 KV AND BELOW, CU CABLE SIZE 400 KCMIL |
ADALET-PLM S400 DOSSERT DPS40 MAC PROD MSS-400 RICHARDS 16 |
| 2014400 |
20 |
0.90 |
CONNECTOR, STRAIGHT SPLICE SPLIT SOLDER TINNED COPPER WITH TAPERED ENDS DESIGNED FOR JOINING COPPER CABLES END TO END, FOR USE ON VOLTAGES OF 46 KV AND BELOW, CU CABLE SIZE #1/0 AWG |
ADALET-PLM S10 DOSSERT DPS10-S MAC PROD MSS-1/0 RICHARDS 9 |
| 2014401 |
39 |
0.80 |
CONNECTOR, STRAIGHT SPLICE SPLIT SOLDER TINNED COPPER WITH TAPERED ENDS DESIGNED FOR JOINING COPPER CABLES END TO END, FOR USE ON VOLTAGES OF 46 KV AND BELOW, CU CABLE SIZE #2/0 AWG |
ADALET-PLM S20 DOSSERT DPS13-S MAC PROD MSS-2/0 RICHARDS 10 |
| 2014687 |
10 |
57.40 |
CONNECTOR, 3-WAY SPLIT SOLDER TINNED COPPER DESIGNED FOR JOINING TWO COPPER CABLES END TO END AND ONE COPPER CABLE TAP, FOR USE ON VOLTAGES OF 46 KV AND BELOW, COPPER CABLE SIZE 350 KCMIL CU, CABLE TAP 350 KCMIL |
DOSSERT DPSSH35 RICHARDS GFSC-350H |
| 2014861 |
191 |
16.00 |
CONNECTOR, INSULATED SECONDARY-TRANSFORMER 1 IN-14 UNC STUD PHASE CONNECTOR, SINGLE 5/16 IN ALLEN HEAD SET SCREW POSITIONS AND ONE STREET LIGHT TAP POSITION, DE- SIGNED FOR TERMINATING INSULATED COPPER AND ALUMINUM SECONDARY AND SERVICE LATERAL PHASE CABLES WITH A CABLE RANGE OF #6 AWG STRANDED THRU 350 KCMIL STRANDED WITH A MAXIMUM O.D. OF .90 IN AND A STREET LIGHT TAP WITH A CABLE RANGE OF #12 AWG STRANDED THRU #2 AWG STRANDED, FOR USE ON SINGLE PHASE PAD MOUNTED TRANSFORMER LOW VOLTAGE PHASE TERMINAL, CONNECTORS SHALL BE INDIVIDU- ALLY BOXED |
UTILCO PTF6-350CJSLDP1 ALCON VBTOT61-350-2SIDC900 CONNECTOR NSSC350-6BSLDI |
| 2014862 |
19 |
5.60 |
CONNECTOR, UNINSULATED SECONDARY-TRANSFORMER 5/8 IN- 11 UNC STUD NEUTRAL CONNECTOR, SINGLE 5/16 IN ALLEN HEAD SET SCREW TYPE 6 MAIN POSITIONS AND ONE STREET LIGHT TAP POSITION UNINSULATED SECONDARY NEUTRAL CONNECTOR DESIGNED FOR TERMANITING INSULATED AND UNINSULATED COPPER AND ALUMINUM SECONDARY AND SERVICE LATERAL NEUTRAL CABLES WITH A CABLE RANGE OF #6 AWG STRANDED THRU 350 KCMIL STRANDED AND STREET NEUTRAL CABLES WITH A CABLE RANGE OF #12 AWG STRANDED THRU #2 AWG STRANDED, FOR USE ON SINGLE PHASE PAD MOUNTED TRANSFORMER LOW VOLTAGE NEUTRAL TERMINAL |
UTILCO PTF6-350JSLDP ALCON BTOT61-350-2 CONNECTOR NSSM350-6SLDI |
| 2014863 |
553 |
9.90 |
CONNECTOR, UNINSULATED SECONDARY TRANSFORMER 1 IN- 14 UNC STUD NEUTRAL CONNECTORS, SINGLE 5/16 IN ALLEN HEAD SET SCREW TYPE 6 MAIN POSITIONS AND ONE STREET LIGHT TAP POSITION UNINSULATED SECONDARY NEUTRAL CON- NECTOR DESIGNED FOR TERMINATING INSULATED AND UNINSU- LATED COPPER AND ALUMINUM SECONDARY AND SERVICE LATERAL NEUTRAL CABLES WITH A CABLE RANGE OF #6 AWG STRANDED THRU 350 KCMIL STRANDED AND STREET LIGHT NEUTRAL CABLES WITH A CABLE RANGE OF #12 AWG THRU #2 AWG STRANDED, FOR USE ON SINGLE PHASE PAD MOUNTED TRANSFORMER LOW VOLTAGE NEUTRAL TERMINAL TERMINAL |
UTILCO PTF6-350JSLDP1 ALCON BTOT61-350-2SI CONNECTOR NSSM350-6BSLDI |
| 2014915 |
36 |
3.20 |
CONNECTOR, ELBOW TERMINAL LUG, BI-METALLIC COPPER/ALUM COMPRESSION CONNECTOR WITH ONE 3/8 IN-16 UNC THREADED HOLE, FOR USE WITH 200A. LOADBREAK ELBOWS ITEMS, UR22 AND UR23, FURNISHED COMPOUND FILLED AND CAPPED, FOR USE ON VOLTAGES OF 15 KV AND BELOW, FOR COMPLETE SPECIFICA- TIONS REFER TO NMPC SYS. SPEC. E-1074 |
ELASTIMOLD 02500-220 DELTEC 2609459A23 CEC INC 9U09AAW163T |
| 2014926 |
162 |
44.30 |
CONNECTOR, DOUBLE BOLT TYPE 6 POSITION INSULATED SECONDARY CONNECTOR DESIGNED FOR CONNECT- ING INSULATED COPPER AND ALUMINUM SECONDARY AND SERVICE LATERAL CABLES WITH A CABLE RANGE OF #4 AWG SOLID THRU 500 KCMIL STRANDED WITH A MAXIMUM INSULATION O.D. OF 1.10 IN, THE CONNECTOR WILL ACCOMMODATE A STREET LIGHT TAP WITH THE USE OF A STREET LIGHT ADAPTER KIT ITEM UR14S, THE INSULATED SECONDARY CONNECTOR IS SUITABLE FOR SERVICE HANDHOLE AND SUBMERSIBLE TRANSFORMER ENCLOSURE APPLICATIONS WHEN OPERATED ON A 600 VOLT SYSTEM AND BELOW ( DNO ) |
q |
| 2014936 |
86 |
34.20 |
CONNECTOR, INSULATED SECONDARY, DOUBLE SET SCREW TYPE, 3/8 IN ALLEN HEAD SET SCREW 6 POSITION, DESIGNED FOR CONNECTING INSULATED COPPER OR ALUMINUM SECONDARY AND SERVICE LATERAL CABLES WITH A CABLE RANGE OF #2 AWG STRANDED THRU 750 KCMIL STRANDED, DESIGNED FOR SERVICE HANDHOLE, SUBMERSIBLE TRANSFORMER ENCLOSURE AND DIRECT BURIAL APPLICATIONS WHEN OPERATED ON A 600 VOLT SYSTEM AND BELOW |
UTILCO PED6-750SSDNMP CONNECTOR SSBC750-6DI |
| 2014957 |
10 |
24.10 |
CONNECTOR, SINGLE BOLT TYPE 4 POSITION INSULATED SECONDARY CONNECTOR DESIGNED FOR CONNECT- ING INSULATED COPPER AND ALUMINUM SECONDARY AND SERVICE LATERAL CABLES WITH A CABLE RANGE OF #4 AWG SOLID THRU 350 KCMIL STRANDED WITH A MAXIMUM INSULATION O.D. OF 1.10 IN, THE CONNECTOR WILL ACCOMMODATE A STREET LIGHT TAP WITH THE USE OF A STREET LIGHT ADAPTER KIT ITEM UR14S, THE INSULATED SECONDARY CONNECTOR IS SUITABLE FOR SERVICE HANDHOLE AND SUBMERSIBLE TRANSFORMER ENCLOSURE APPLICATIONS WHEN OPERATED ON A 600 VOLT SYSTEM AND BELOW ( DNO ) |
q |
| 2014958 |
141 |
30.00 |
CONNECTOR, SINGLE BOLT TYPE 6 POSITION INSULATED SECONDARY CONNECTOR DESIGNED FOR CONNECT- ING INSULATED COPPER AND ALUMINUM SECONDARY AND SERVICE LATERAL CABLES WITH A CABLE RANGE OF #4 AWG SOLID THRU 350 KCMIL STRANDED WITH A MAXIMUM INSULATION 0.D. OF 1.10 IN, THE CONNECTOR WILL ACCOMMODATE A STREET LIGHT TAP WITH THE USE OF A STREET LIGHT ADAPTER KIT ITEM UR14S, THE INSULATED SECONDARY CONNECTOR IS SUITABLE FOR SERVICE HANDHOLE AND SUBMERSIBLE TRANSFORMER ENCLOSURE APPLICATIONS WHEN OPERATED ON A 600 VOLT SYSTEM AND BELOW ( DNO ) |
q |
| 2015315 |
37 |
59.40 |
CONNECTOR, STRAIGHT SPLICE TINNED ALUMINUM COMPRESSION WITH APPROXIMATELY 12 DEGGREE TAPERED ENDS, DESIGNED FOR JOINING ALUM TO ALUM OR ALUM TO COPPER CABLES END TO END WITH A CABLE STOP AT THE CENTER OF THE CONNECTOR BARREL, FURNISHED COMPOUND FILLED AND CAPPED, FOR USE ON VOLTAGES OF 46 KV AND BELOW, CONNECTOR SHALL BE IN ACCORDANCE WITH ANSI C119.4 CLASS A CLASS 2 MINIMUM ALUMINUM CABLE SIZE #4/0 AWG |
BURNDY YS28AT HOMAC SATC4/0-NM-TN FRANKEL LSA4/0R RICHARDS OATC12M |
| 2015363 |
72 |
115.90 |
CONNECTOR, MOLE INSULATED HOUSING 2000A.INSULATED MECHANICAL CLAMPING TYPE SECONDARY NETWORK CON- NECTOR FOR USE ON A 208Y/120V. NETWORK SYSTEM AND DESIGNED FOR CONNECTING MULTIPLE SECONDARY NETWORK CABLES RATED 600V INSIDE OF A NETWORK MANHOLE. THE CONNECTOR HOUSING HAS AN END OUTLET FOR FUTURE EXPANSION BY USE OF A MOLE COUPLER ITEM UC50F. CU. CABLE RANGE #6 AWG STR. THRU 600 KCMIL STR. NO. OF CABLE OUTLET POSITION 11. |
BURNDY ZMT11-25A9 DOSSERT MCA250-11-A112 |
| 2010445 |
50 |
2.70 |
COUPLING, CONDUIT, 5 DEGREE ANGLE, FEMALE BOTH ENDS, 5 IN, MOLDED FROM GREY PVC IN ACCORDANCE WITH NEMA TC9 & ASTM F-512 |
CARLON E2440PF SCEPTER 7604360050 |
| 2010446 |
76 |
2.10 |
COUPLING, CONDUIT, PVC, 5 DEGREE ANGLE, 6 IN, MOLDED, GREY, FEMALE BOTH ENDS, IN ACCORDANCE WITH NEMA TC9 AND ASTM F-512 |
CARLON E2440R SCEPTER 7604360060 |
| 2010455 |
980 |
1.40 |
COUPLING, CONDUIT, 5 IN STRAIGHT, MOLDED FROM GREY PVC IN ACCORDANCE WITH NEMA TC9 AND ASTM F-512, DESIGNED FOR DIRECT BURIAL WITHOUT ENCASEMENT IN CONCRETE, ALSO SUITABLE FOR CONCRETE ENCASEMENT |
CARLON E240P SCEPTER 76043550 |
| 2010456 |
130 |
3.30 |
COUPLING, CONDUIT, 6 IN STRAIGHT, MOLDED FROM GREY PVC IN ACCORDANCE WITH NEMA TC9 AND ASTM F-512, DESIGNED FOR DIRECT BURIAL WITHOUT ENCASEMENT IN CONCRETE, ALSO SUITABLE FOR CONCRETE ENCASEMENT |
CARLON E240R SCEPTER 76043560 |
| 2006025 |
30 |
180.90 |
ELBOW, LIGHTNING ARRESTOR, 27 KV, DISTRIBUTION CLASS, METAL-OXIDE TYPE SURGE ARRESTOR, 27 KV (22KV MVOV) SHIELDED ELBOW HOUSED IN ACCORDANCE WITH ANSI C62.11 AND ANSI/IEEE 386, FURNISHED WITH A BARE 37 IN LONG #6 AWG STRANDED COPPER GROUNDING CABLE |
JOSLYN MFG 8132B1027J011 ELASTIMOLD 375ESA-27 |
| 2014072 |
6 |
92.80 |
ELBOW, LOADBREAK KIT, 200 AMP, 21.1/36.6 KV, FOR USE ON #1/0 AWG ALUM 35KV, PRIMARY CABLE WITH CONCENTRIC NEUTRAL, ITEM UC35CJ. THE KIT SHALL INCLUDE ALL MATERIAL NECESSARY FOR INSTALLATION, INCLUDING A SHIELDED ELBOW HOUSING, ARC FOLLOWER PIN, CRIMP CABLE CONNECTOR, WRENCH AND SILICONE GREASE. TO BE IN ACCORD- ANCE WITH ANSI/IEEE 386 |
ELASTIMOLD 357LR-J0240 |
| 2014943 |
1 |
10.40 |
ELBOW, LOADBREAK KIT, 200A 8.3/14.4KV FOR USE ON #2 AWG ALUMINUM 15KV PRIMARY CABLE WITH CONCENTRIC NEUTRAL ITEMS UC11BA, UC11BB AND UC12B. THE KIT SHALL INCLUDE ALL MATERIAL NECESSARY FOR INSTALLATION INCLUDING A SHIELDED ELBOW HOUSING, ARC FOLLOWER PIN, CRIMP CABLE CONNECTOR, WRENCH AND SILICONE GREASE. FOR COMPLETE SPECIFICATIONS REFER TO N.M.P.C. SYSTEM SPEC. E-1074 |
ELASTIMOLD 165LR-B-5220 COOPER PWR LE215A04 |
| 2014947 |
29 |
21.90 |
ELBOW, LOADBREAK KIT, 200A 8.3/14.4KV FOR USE ON #2 AWG COPPER 15KV PRIMARY CABLE WITH CONCENTRIC NEUTRAL, ITEM UC11B, THE KIT SHALL INCLUDE ALL MATERIAL NECESSARY FOR INSTALLATION INCLUDING A SHIELDED ELBOW HOUSING, ARC FOLLOWER PIN, CRIMP CABLE CONNECTOR, TAPE ADAPTER, SILICONE GREASE AND WRENCH, FOR COMPLETE SPECIFICATIONS REFER TO NMPC SYS. SPEC. E-1074 (MAINTENANCE WORK ONLY) |
ELASTIMOLD 165LRR-GA220-CS780 CEC INC 9U01ABD633 |
| 2014954 |
5 |
46.60 |
ELBOW, GROUNDING, 15 KV AN UNSHIELDED INSULATING AND WATER SEALING ELBOW ORANGE OR YELLOW IN COLOR FOR GROUNDING APPLICATIONS, FURNISHED COMPLETELY ASSEMBLED IN INDIVIDUAL CARTONS WITH A SIX FOOT LONG ORANGE OR YELLOW JACKETED #1/0 AWG COPPER FLEXIBLE WELDING TYPE CABLE WITH A CRIMPED ON TINNED PLATED COPPER TERMINAL PLUG CONNECTOR, FOR COMPLETE SPECIFICATIONS REFER TO N.M.P.C. SYSTEM SPECIFICATION E-1074 |
ELASTIMOLD 160GLR COOPER PWR 2604128B26M |
| 2014074 |
20 |
352.80 |
FEED-THRU, LOADBREAK DEVICE, 200 AMP, 21.1/36.6 KV, FOR ELECTRICALLY CONNECTING AND WATER SEALING TWO LOADBREAK ELBOWS OR CONNECTING ONE LOADBREAK ELBOW TO OTHER LOADBREAK ACCESSORIES, TO BE INSTALLED ON A 35 KV STYLE PARKING STAND, TO BE IN ACCORDANCE WITH ANSI/IEE 386 |
ELASTIMOLD 373FT |
| 2014962 |
4 |
51.60 |
FEED-THRU, LOADBREAK DEVICE, 200 AMP, 8.3/14.4 KV FOR ELECTRICALLY CONNECTING AND WATER SEAL- ING TWO LOADBREAK ELBOWS OR CONNECTING ONE LOADBREAK ELBOW TO OTHER LOADBREAK ACCESSORIES, FOR INSTALLING ON A 15 KV STYLE PARKING STAND, FOR COMPLETE SPECIFICATIONS REFER TO N.M.P.C. SYSTEM SPECIFICATION E-1074 |
ELASTIMOLD 164FT COOPER PWR 2637168C01M CEC INC 9U07AKF200 |
| 8008091 |
55 |
3.90 |
FILLER, MATERIAL, WOOL LIKE FIBROUS MATERIAL, WHITE IN COLOR, PACKAGED IN 2 LB BAGS, FOR USE AS A FILLER WITH FIRE STOP SEALING COMPOUND PUTTY, ITEM UK50, AS A FIRE STOP SYSTEM, SEALING CONDUITS, WALLS AND FLOOR OPENINGS TO PREVENT THE SPREAD OF FIRE, SMOKE AND/OR TOXIC GASES AND TO RESTORE FIRE RATED WALL AND FLOOR INTEGRITY, PACKAGED 5 - 2 LB BAGS PER CARTON |
NELSON AA417 |
| 2003012 |
4 |
250.80 |
FUSE, NETWORK PROTECTOR LOW-VOLTAGE NON-ELPUL- SION SILVER-SAND TYPE FUSE FOR USE WITH WEST- INGHOUSE TYPE CMD NETWORK PROTECTOR ONLY ITEM UP2 OR UP3. PROTECTOR CURRENT RATING 1200 |
WH/CORP NPL140D318GO5 |
| 2003014 |
10 |
424.30 |
FUSE, NETWORK PROTECTOR LOW-VOLTAGE NETWORK PRO- TECTOR NON-EXPULSION SILVER-SAND TYPE FUSE FOR USE WITH WESTINGHOUSE TYPE CMD NETWORK PROTECTOR ONLY ITEM UP2 OR UP3. PROTECTOR CURRENT RATING 2825 |
WH/CORP NPL140D318GO2 |
| 3506167 |
296 |
54.10 |
INDICATOR, CABLE FAULT, TYPE CR, DESIGNED WITH A MAG- NETIC SENSING REED SWITCH, TRIGGERED BY PASSING FAULT CURRENT, RESET AUTOMATIC WHEN NORMAL CURRENT FLOW HAS BEEN RESTORED, FURNISHED WITH A CURRENT SENSING ARM AND A CLAMP SPRING HOLDER, FOR USE ON UG PRIMARY CABLE |
AB CHANCE 1CRI0200 COOPER PWR 8137268B01ML |
| 3506168 |
161 |
52.20 |
INDICATOR, CABLE FAULT, TYPE CR, DESIGNED WITH A MAG- NETIC SENSING REED SWITCH, TRIGGERED BY PASSING FAULT CURRENT, RESET AUTOMATIC WHEN NORMAL CURRENT FLOW HAS BEEN RESTORED, FURNISHED WITH A CURRENT SENSING ARM AND A CLAMP SPRING HOLDER, FOR USE ON UG PRIMARY CABLE |
AB CHANCE 1CRI0400 COOPER PWR 8137268B03M |
| 2014076 |
14 |
129.20 |
INSERT, PLUG, LOADBREAK BUSHING, 200 AMP, 21.1/36.6 KV, FOR USE AS AN INTERFACE BETWEEN AN APPARATUS BUSHING WELL AND A LOADBREAK ELBOW ITEM UR90 OR OTHER LOADBREAK ACCESSORIES, TO BE IN ACCORDANCE WITH ANSI/IEEE 386 |
ELASTIMOLD 3701A4 |
| 2014960 |
4 |
61.80 |
JUNCTION, LOADBREAK, 200A 8.3/14.4 KV, 3-WAY WITHOUT HARDWARE, FOR CONNECTING LOADBREAK ELBOWS ITEM UR23 IN VAULTS AND ENCLOSURES, FOR COMPLETE SPECIFICATIONS REFER TO N.M.P.C. SYSTEM SPECIFICATION E-1074 |
ELASTIMOLD 164J3-5 COOPER PWR 2637164C12M CEC INC 9U07ALF300 |
| 2014968 |
3 |
29.00 |
JUNCTION, LOADBREAK, 200A, 8.3/14.4 KV, 3-WAY HARDWARE ONLY, FOR CONNECTING LOADBREAK ELBOWS ITEM UR23 IN VAULTS AND ENCLOSURES, FOR COMPLETE SPECIFICATIONS REFER TO N.M.P.C. SYSTEM SPECIFICATION E-1074 |
ELASTIMOLD 163J3-6 COOPER PWR 2637172B02BG CEC INC 9U09AAW207 |
| 808537 |
36 |
113.00 |
KIT, CABLE PREP, FOR CLEANING AND DEGREASING MEDIUM AND HIGH VOLTAGE CABLES WHEN PREPARING A CABLE SPLICE OR CABLE TERMINATION, THE KIT SHALL CONCIST OF: (2) 32 OZ SPRAY TRIGGER CONTAINERS OF HP SOLVENT CLEANER AND DEGREASER, ITEM UC80B; (48) 9 1/4 IN X 11 1/4 IN TOWELETTES PREMOISTENED WITH HP SOLVENT CLEANER AND DEGREASER, ITEM UC80C; (200) 12 IN X 12 IN WIPING TOWELETTES, ITEM UC80D, AND (1) 20 IN X 9 1/4 IN X 10 1/2 IN HIGH PLASTIC CASE, ITEM UC80E |
AMER POLY SM-KIT-NIMO |
| 2014965 |
20 |
3.90 |
KIT, STREET LIGHT ADAPTER, DESIGNED FOR USE WITH THE SINGLE AND DOUBLE BOLT INSULATED SECONDARY CONNECTOR ITEMS UR14A4, UR14A6 AND UR14B6 FOR CONNECTING INSULATED COPPER AND ALUMINUM STREET LIGHT CABLE WITH A CABLE RANGE OF #10 AWG SOLID THRU #2 AWG STRANDED WITH A MAXIMUM INSULATION O.D. OF .480 IN, THE KIT INCLUDES AN INSULATED DOUBLE SET SCREW CONNECTOR, A SPECIAL LONGER LENGTH INSULATED 3/4 INCH HEX HEAD B0LT AND A SEALING BOOT ( DNO ) |
q |
| 2015298 |
13 |
24.30 |
LIMITER, ELEMENT CABLE-TO-CABLE-HIGH CAPACITY SELF- CONTAINED AND SELF-PROTECTING WITH TINNED OR SILVER PLATED COPPER CABLE SOCKETS AND WITH AN INTERRUPTING RATING OF 200,000 AMPERES RMS SYMMETRICAL RATED 600V, FOR USE WITH 500 KCMIL COPPER CABLE ITEM UC9G ON 480 Y/277V OR ON A 208 Y/120V NETWORK SYSTEM WHERE SHORT- CIRCUIT CURRENT VALUES ON ONE CABLE MAY EXCEED 30,000 AMPERES |
BUSSMANN KCM GOULD SHAW CP500C1 |
| 2015306 |
14 |
22.10 |
LIMITER, ELEMENT CABLE-TO-BUS LIMITER, HIGH CAPACITY SELF-CONTAINED AND SELF-PROTECTING WITH AN INTERRUPING RATING OF 200,000 AMPERES RMS SYMMETRICAL RATED 600V, FOR USE WITH 500 KCMIL COPPER CABLE ITEM UC9G ON A 480Y/277V NETWORK SYSTEM AND A 208Y/120V NETWORK SYSTEM WHERE SHORT-CIRCUIT CURRENT VALUES ON ONE CABLE MAY EXCEED 30,000 AMPERES, THE COMPLETE UNIT SHALL INCLUDE A LIMITER ELEMENT WITH A TINNED OR SILVER- PLATED COPPER LUG AND WITH A TINNED OR SILVER-PLATED COPPER CABLE SOCKET, FOR USE WITH AN INSULATING RUBBER SLEEVE ITEM UL5S |
BUSSMANN KDM GOULD SHAW CP500C3 |
| 2011234 |
8 |
2.80 |
NUT, LOCK, MALLEABLE IRON FOR USE WITH THREADED CONDUIT AND CONDUIT FITTINGS 4 IN |
APPLET ELC BL-400 STL CTY LN-110 THOMAS&BET 150 MIDW ELEC 20 RACO INC 1016 GOULD ELEX 160 |
| 2030354 |
13 |
1.80 |
PLATE, ZINC-PLATED STEEL MOUNTING 4 7/8 X 4 7/8 IN X 5/64 IN, PLATE SHALL HAVE AS A MINI- MUM PRE-PUNCHED HOLES TO MOUNT A FUSE HOLDER ITEM UN4F AND TO SECURE MOUNTING PLATE IN AN ENCLOSURE BOX ITEM UN1B DO NOT REORDER USE UP EXISTING STOCK |
q |
| 2010422 |
20 |
0.40 |
PLUG, CONDUIT, PVC, MOLDED PE, 2 IN, GREY, IN ACCORDANCE WITH NEMA TC9 AND ASTM F-512 |
CARLON P258JT SCEPTER 54 |
| 2014515 |
26 |
350.20 |
POTHEAD, 34.5KV 200 KV BIL SOLDER SEALED POTHEAD OUTDOOR TYPE GREY PORCELAIN WITH TINNED WIPING SLEEVE TYPE CABLE ENTRANCE FOR SINGLE CONDUCTOR PILC CABLE WITH A MAXIMUM CONDUCTOR SIZE OF 500 KCMIL COPPER, POTHEAD SHALL BE FURNISHED WITH A BOLT ON BRONZE MOUNTING BRACKET AND WITH A SOLDER TYPE SLOTTED STEM |
G&W ELEC ST195GJ-SP MAC PROD NX79901947-1-14T |
| 2014517 |
40 |
453.10 |
POTHEAD, 23KV 150 KV BIL SOLDER SEALED POTHEAD OUTDOOR TYPE GREY PORCELAIN WITH TINNED WIPING SLEEVE TYPE CABLE ENTRANCE FOR SINGLE CONDUCTOR PILC CABLE WITH A MAXIMUM CONDUCTOR SIZE OF 500 KCMIL COPPER, POTHEAD SHALL BE FURNISHED WITH A BOLT ON BRONZE MOUNTING BRACKET AND WITH A SOLDER TYPE SLOTTED STEM FOR 350 KCMIL COMPACT ROUND COPPER AND ALSO WITH A UNIVERSAL CLAMP TYPE TINNED COPPER AERIAL LUG WITH A MINIMUM CABLE RANGE OF #6 AWG THRU 500 KCMIL, POTHEAD SHALL BE IN ACCORDANCE WITH IEEE STANDARD 48. TO BE STOCKED BY STOREROOM (3) BUFFALO (DEWEY) ONLY |
G&W ELEC ST185FJ-SP MAC PROD 79901847-1-14T |
| 2014750 |
15 |
437.20 |
POTHEAD, 23KV OIL IMMERSED 150 KV BIL SOLDER SEALED POTHEAD TYPE GREY PORCELAIN WITH TINNED WIPING SLEEVE TYPE CABLE ENTRANCE FOR SINGLE CONDUCTOR PILC CABLE WITH A MAXIMUM CONDUCTOR SIZE OF #1/0 AWG COPPER, POTHEAD SHALL BE FURNISHED WITH A MOUNTING FLANGE AND WITH A SOLDER TYPE STEM FOR #1/0 AWG COPPER AND ALSO WITH A 90 DEG OFFSET TINNED COPPER 2 HOLE AERIAL LUG. POTHEAD SHALL BE IN ACCORDANCE WITH IEEE STANDARD 48, TO BE STOCKED BY STOREROOM (3) BUFFALO (DEWEY) ONLY |
G&W ELEC SNTR185E-RA MAC PROD X79801727-1-18T |
| 2014751 |
15 |
466.70 |
POTHEAD, 46KV 250 KV BIL SOLDER SEALED POTHEAD OUTDOOR TYPE GREY PORCELAIN WITH TINNED WIPING SLEEVE TYPE CABLE ENTRANCE FOR SINGLE CONDUCTOR PILC CABLE WITH A MAXIMUM CONDUCTOR SIZE OF 750 KCMIL COPPER, POTHEAD SHALL BE FURNISHED WITH A BOLT ON BRONZE MOUNTING BRACKET AND WITH A COMPRESSION TYPE STEM FOR 750 KCMIL COMPACT ROUND COPPER AND ALSO WITH A UNIVERSAL CLAMP TYPE TINNED COPPER AERIAL LUG WITH A CABLE RANGE OF #4/0 AWG THRU 750 KCMIL, POTHEAD SHALL BE IN ACCORDANCE WITH IEEE STANDARD 48, TO BE STOCKED BY STOREROOM (200) SYRACUSE AND (400) ALBANY ONLY |
MAC PROD HAE-5668-7 MAC PROD NA59901057-1-14T |
| 2010504 |
4 |
16.20 |
RISER-GUARD, SECTION, 4 IN HIGH-IMPACT PVC SCHEDULE 40, FURNISHED IN 10 FT LENGTHS, IN ACCORDANCE WITH NEMA STD PH 41-1981 |
CARLON 59015N AET/APPL. PM440 CUSTOM CPUS 441000 |
| 2010522 |
75 |
3.40 |
RISER-GUARD, BACK UP PLATE, 2 IN PVC TAMPER-PROOF SAFETY BACK UP PLATE FURNISHED IN 10 FT LENGTHS, FOR USE WITH ITEM UK10 |
CARLON 59111N AET/APPL. PMB2 CUSTOM CPUBP 21000 |
| 2010524 |
63 |
6.30 |
RISER-GUARD, BACK UP PLATE, 4 IN PVC TAMPER-PROOF SAFETY BACK UP PLATE FURNISHED IN 10 FT LENGTHS, FOR USE WITH ITEM UK10 |
CARLON 59115N AET/APPL. PMB4 CUSTOM CPUBP 41000 |
| 2010525 |
91 |
8.10 |
RISER-GUARD, PLATE, BACK UP, SAFETY, PVC, 5 IN, TAMPER- PROOF, FURNISHED IN 10 FT LENGTHS, FOR USE WITH ITEM UK10 |
CARLON 59116N AET/APPL. PMB5 CUSTOM CPUBP 51000 |
| 2014953 |
118 |
17.30 |
ROD, GROUNDING, 15 KV FOR USE IN GROUNDING FEED -THRU DEVICE ITEM UR29 OR BUSHING PLUG INSERT ITEM UR36 AFTER CIRCUIT HAS BEEN TESTED "DEAD", FOR COMPLETE SPECIFICATIONS REFER TO N.M.P.C. SYSTEM SPECIFICATION E-1074 |
GE 9U09BAB001 |
| 2014964 |
64 |
2.60 |
ROD, ADAPTER, UNINSULATED NEUTRAL, MADE FROM BARE 3/8 IN MEDIUM HARD DRAWN HIGH CONDUCTIVITY COPPER FURNISHED WITH A SEALING SLEEVE AND DE- SIGNED FOR USE WITH INSULATED SECONDARY CONNEC- TOR ITEMS UR14A4 UR14A6 UR14B6 UR15A5 AND UR15A8 FOR CONNECTING UNINSULATED COPPER NEUTRAL WIRE TO AN INSULATED SECONDARY CONNECTOR |
RICH/WHITF R14N FARGO GU-500 ANK |
| 8002776 |
550 |
0.50 |
SIGN, NOTICE FOR CLEARANCE : NOTICE SIGN FOR CLEARANCE OF OBSTRUCTIONS IN FRONT OF PAD-MOUNTED EQUIPMENT DOORS. MATERIAL TO BE 3" X 5" WHITE ACRYLIC FILM, 3 MILS THICK, TAMPER RESISTANT WITH A HEAVY COAT WEIGHT OF ACRYLIC ADHESIVE AND A SERVICE TEMPERATURE OF -30 DEG. F TO + 250 DEG. F. SIGN SHALL BE IN ACCORDANCE WITH N.M.P.C. DRAWING A-36106-S. |
ELEC MACH NMPC DWG. A-36106-S BRADY NMPC DWG. A-36106-A NMPC NMPC DWG. A-36106-S LEM PROD NMPC DWG. A-36106-S |
| 2014220 |
108 |
0.90 |
SLEEVE, LEAD, 6 IN I.D., 3/16 IN WALL THICKNESS, ROUND CHEMICAL LEAD, FURNISHED IN 5 FT LENGTHS, UNLESS OTHERWISE SPECIFIED ON THE PURCHASE ORDER, SHIPPED IN INDIVIDUAL HEAVY-DUTY FIBER TUBES, APPROX. WT. PER FT 17.94 LBS, FOR USE WITH LEAD SHEATH CABLE SPLICES |
MAC PROD N/A CANFIELD N/A FRY METALS N/A TARA CORP N/A WILLARD IN N/A |
| 2010318 |
383 |
0.60 |
SPACER, CONDUIT, 6 IN INTERMEDIATE MOLDED HIGH-IMPACT POLYSTYRENE CONDUIT SPACER SUITABLE FOR ENCASEMENT IN CONCRETE OR DIRECT BURIAL, SPACERS SLIDE TOGETHER HORIZONTALLY AND SNAP TOGETHER VERTICALLY PROVIDING A 3 IN HORIZONTAL AND 3 IN VERTICAL SPACING BETWEEN CONDUITS. SUITABLE FOR TEMPERATURE RANGE OF -20 DEG F TO 170 DEG F, FOR USE WITH PVC CONDUIT ITEM UK6A AND GALVANIZED STEEL CONDUIT ITEM UK30 |
CARLON S-289RLN(STOREROOMS 200 & 400) UNDERGRD 162 (STOREROOM 3 ONLY) |
| 2010319 |
3020 |
0.60 |
SPACER, CONDUIT, 6 IN BASE MOLDED HIGH-IMPACT POLY- STYRENE SUITABLE FOR ENCASEMENT IN CONCRETE OR DIRECT BURIAL, SPACERS SLIDE TOGETHER HORIZONTALLY AND SNAP TOGETHER VERTICALLY PROVIDING A 3 INCH HORIZONTAL AND 3 IN VERTICAL SPACING BETWEEN CONDUITS, SUITABLE FOR TEMPERATURE RANGE OF -20 DEGF TO 170F DEGF |
CARLON S-288RLN (STOREROOMS 200 & 400 UNDERGRD 163 (STOREROOM 3 ONLY) |
| 2010476 |
16 |
0.20 |
SPACER, CONDUIT, GALVANIZED STEEL, SUITABLE FOR 1/2 TO 1 INCH CONDUIT, SPACER SHALL PROVIDE 1/4 INCH SPACING OF CONDUIT AND SHALL BE STACK- ABLE WHERE GREATER SPACING IS REQUIRED |
THOMAS&BET 1350 |
| 2014070 |
1 |
165.80 |
SPLICE, HEAT SHRINK KIT, STRAIGHT CABLE SPLICE -35KV DESIGNED FOR SPLICING TOGETHER TWO # 1/0 AWG AL. OR TWO #2/0 AWG CU. CONCENTRIC NEUTRAL UNDERGROUND PRIMARY CABLES, ITEMS UC35CJ OR UC35DJ. THE KIT SHALL BE INDIV- IDUALLY BOXED AND INCLUDE ONE BLACK STRESS CONTROL TUBE ONE RED INSULATING TUBE, ONE BLACK/RED SHIELDING/INSUL- ATING TUBE, ONE WRAPAROUND BLACK OUTER SEALING TUBE, TWO 24 INCH STAINLESS STEEL CHANNELS, ONE CHANNEL STRIP THREE RED SEALANT STRIPS, THREE YELLOW STRESS RELIEF MA TERIAL STRIPS, TWO YELLOW ANGLE CUT STRESS RELIEF MATER IAL STRIPS, TWOPROTECTIVE AL. FOIL STRIPS, AND ONE STA- INLESS STEEL GROUNDING COIL CLAMP.TO BE IN ACCORDANCE WITH ANSI/IEEE 404. |
q |
| 2014077 |
47 |
276.40 |
SPLICE, HEAT SHRINK KIT, STRAIGHT CABLE SPLICE-35KV DESIGNED FOR SPLICING TOGETHER TWO 750 KCMIL COPPER CONCENTRIC NEUTRAL UNDERGROUND PRIMARY CABLES, ITEM UC35HJ, THE KIT SHALL BE INDIVIDUALLY BOXED AND INCLUDE ONE BLACK STRESS CONTROL TUBE, ONE RED INSULATING TUBE ONE BLACK/RED SHIELDING/INSULATING TUBE, ONE WRAPAROUND BLACK OUTER SEALING TUBE, TWO 24 INCH STAINLESS STEEL CHANNELS, ONE CHANNEL CLIP, FOUR RED SEALANT STRIPS, FOUR YELLOW STRESS RELIEF MATERAIL STRIPS, TWO YELLOW ANGLE CUT STRESS RELIEF MATERIAL STRIPS, TWO PROTECTIVE AL FOIL STRIPS AND ONE STAINLESS STEEL GROUNDING COIL CLAMP, TO BE IN ACCORDANCE WITH ANSI/IEEE 404 |
RAYCHEM HVS-3512E-J-NM |
| 2014813 |
3 |
22.50 |
SPLICE, KIT, STRAIGHT, 200 AMP, 15 KV, PREMOLD- ED DESIGNED FOR SPLICING TOGETHER ONE #2 AWG ALUMINUM CONCENTRIC NEUTRAL PRIMARY CABLE ITEM UC11BB WITH AN INSULATION O.D. OF .698 +-.018 IN TO ONE #2 AWG COPPER CONCENTRIC NEUTRAL PRIMARY CABLE ITEM UC11B WITH AN IN- SULATION O.D. OF .79 +-.04 IN,THE KIT IN- CLUDES ALL MATERIAL (EXCEPT TAPE) NECESSARY FOR INSTALLATION INCLUDING A SHIELDED SPLICE HOUSING ONE CRIMP CONNECTOR TWO CABLE ADAPTERS ONE TAPE ADAPTER AND SILICONE GREASE |
CEC INC 9U06ADC171CE |
| 2014815 |
26 |
80.70 |
SPLICE, KIT, STRAIGHT, 600 AMP, 15 KV, PREMOLD- ED DESIGNED FOR SPLICING TOGETHER TWO 500 KCMIL ALUMINUM CONCENTRIC NEUTRAL PRIMARY CABLES ITEM UC11GG WITH AN INSULATION O.D. OF 1.30+-.04 IN, THE KIT INCLUDES ALL MATERIAL (EXCEPT TAPE) NECESSARY FOR INSTALLATION IN- CLUDING A SHIELDED SPLICE HOUSING ONE CRIMP CONNECTOR TWO CABLE ADAPTERS TWO TAPE ADAPTERS AND SILICONE GREASE |
CEC INC 9U06CLS141 |
| 2014819 |
6 |
70.20 |
SPLICE, KIT, STRAIGHT, 600 AMP, 15 KV, PREMOLDED DESIGNED FOR SPLICING TOGETHER TWO #4/0 AWG COPPER CONDUCTOR PREASSEMBLED METAL TAPE LASHED AERIAL CABLE ITEM A6OE WITH AN INSULA- TION O.D. OF 1.03 +-.04 IN,THE KIT INCLUDES ALL MATERIAL (EXCEPT TAPE) NECESSARY FOR IN- STALLATION INCLUDING A SHIELDED SPLICE HOUSING ONE CRIMP CONNECTOR TWO CABLE ADAPTERS TWO TAPE ADAPTERS AND SILICONE GREASE |
CEC INC 9U06CHK200 |
| 2014823 |
4 |
81.70 |
SPLICE, HEAT SHRINK KIT, STRAIGHT CABLE SPLICE-15 KV DESIGNED FOR SPLICING TOGETHER TWO 1/C-#4/0 AWG COPPER PREASSEMBLED METAL TAPE LASHED AERIAL CABLE, ITEM A60E. KIT SHALL BE INDIVIDUALLY BOXED AND INCLUDE ONE BLACK STRESS CONTROL TUBE, ONE RED INSULATING TUBE, ONE BLACK /RED INSULATING/SHIELDING TUBE, ONE BLACK OUTER SEALING TUBE, ONE RED SEALANT STRIP, TWO YELLOW STRESS RELIEF MATERIAL STRIPS, TWO YELLOW ANGLE CUT STRESS RELEIF MATERIAL STRIPS, TWO PROTECTIVE FOIL WRAPS, TWO STAIN- LESS STEEL SPRING COIL CLAMPS, ONE TINNED COPPER WIRE WOVEN BRAID AND THREE COPPER FOIL TAPE STRIPS. NOTE: NOT INCLUDED IN KIT - CONNECTOR, USE ITEM UC60E AND TINNED COPPER MESH KNIT TAPE, USE ITEM T1U1. |
RAYCHEM HVS-1511-NM |
| 2014951 |
103 |
20.90 |
SPLICE, DOUBLE BOLT TYPE INSULATED SECONDARY STRAIGHT SPLICE DESIGNED FOR SPLICING TOGETHER TWO INSULATED COPPER AND/OR ALUMINUM SECONDARY CABLES WITH A CABLE RANGE OF #4 AWG SOLID THRU 500 KCMIL STRANDED WITH A MAXIMUM INSULATION O.D OF 1.10 IN, THE INSULATED SECONDARY STRAIGHT SPLICE IS SUITABLE FOR DIRECT BURIAL AND SERVICE HANDHOLE APPLICATIONS WHEN OPERATED ON A 600 VOLT SYSTEM AND BELOW ( DNO ) |
q |
| 2014978 |
3 |
42.40 |
TAP, WELL REDUCING, 600A/200A, 15 KV INSULATING SHIELDING AND WATER-SEALING REDUCING BUSHING WELL INTERFACE BETWEEN A 600A DEADBREAK ELBOW ITEM UR60 OR 600A DEADBREAK BUSHING EXTENSION ITEM UR69 AND A 200A LOADBREAK BUSHING PLUG INSERT ITEM UR36 ( DNO USE UP EXISTING STOCK) SEE ITEM UR68A |
ELASTIMOLD 650RTW |
| 2014071 |
2 |
101.80 |
TERMINATION, HEAT SHRINK KIT, INDOOR AND OUTDOOR-35KV DESIGNED FOR TERMINATING #1/0 AWG AL. OR #2/0 AWG CU. CONCENTRIC NEUTRAL UNDERGROUND PRIMARY CABLE, ITEMS UC35CJ OR UC35DJ. THE KIT SHALL BE INDIVIDUALLY BOXED AND INCLUDE ONE BLACK STRESS CONTROL TUBE, ONE RED INSULATING TUBE, ONE RED JACKET TUBE, ONE RED SHIM TUBE FOUR RED SKIRTS, THREE RED SEALANT STRIPS AND ONE YELLOW ANGLE CUT STRESS RELIEF MATERIAL STRIP. |
RAYCHEM HVT-352-SJ |
| 2014809 |
46 |
19.60 |
TERMINATION, CABLE KIT, PREMOLDED, 15 KV, DESIGNED FOR TERMINATING 500 KCMIL ALUMINUM CONCENTRIC NEUTRAL PRIMARY CABLE ITEM UC11GG WITH AN INSULATION O.D. OF 1.30 +-.04 INCHES. THE KIT INCLUDES ALL MATERIAL (EXCEPT TAPE AND TERMINAL CONNECTOR) NECESSARY FOR INSTALLATION, INCLUDING A SHIELDED STRESS CONE; SIX GREY RUBBER SKIRTS; ONE TAPE ADAPTER, AND SILICONE GREASE |
ELASTIMOLD 35MTGI-JA-6-CS357 CEC INC 9U08LYX001 |
| 2014810 |
1 |
18.40 |
TERMINATION, CABLE KIT, PREMOLDED, 15 KV, DESIGNED FOR TERMINATING #2 AWG ALUMINUM CONCENTRIC NEUTRAL PRIMARY CABLE ITEM UC11BB UC11BJ UC12B OR #2 AWG ALUMINUM PREASSEMBLED LASHED AERIAL CABLE ITEM A60B WITH AN INSULATION O.D. OF .698 +-.018 INCHES THE KIT INCLUDES ALL MATERIAL (EXCEPT TAPE) NEC- ESSARY FOR INSTALLATION INCLUDING A CRIMP TERMI- NAL PLUG CONNECTOR A RUBBER CONNECTOR CAP AND SILICONE GREASE |
ELASTIMOLD 16THG-FB-0220-4-C5577 |
| 2014811 |
90 |
20.10 |
TERMINATION, CABLE KIT, PREMOLDED, 15 KV, DESIGNED FOR TERMINATING 750 KCMIL ALUMINUM CONCENTRIC NEUTRAL PRIMARY CABLE ITEM UC11HG WITH AN INSULATION O.D. OF 1.49 +-.04 INCHES. THE KIT INCLUDES ALL MATERIAL (EXCEPT TAPE AND TERMINAL CONNECTOR) NECESSARY FOR INSTALLATION INCLUDING A SHIELDED STRESS CONE; SIX GREY RUBBER SKIRTS; ONE TAPE ADAPTER AND SILICONE GREASE |
ELASTIMOLD 35MTGI-JB-6-CS357 CEC INC 9U08NYX002 |
| 678550 |
3 |
2,031.50 |
TRANSFORMER, SINGLE PHASE, 167 KVA LOW PROFILE PAD MOUNTED DISTRIBUTION. 13200 GRD Y/7620 - 240/120V (NO TAPS). FOR COMPLETE SPECIFICATIONS REFER TO NMPC SYSTEM SPECIFICATION E-1056. |
CENT. MOL N/A COOPER PWR N/A ABB T&D N/A |
| 678551 |
1 |
1,414.40 |
TRANSFORMER, SINGLE PHASE, 167 KVA LOW PROFILE PAD MOUNTED DISTRIBUTION. 4160 GRD Y/2400 X 13200 GRD Y/7620 - 240/120V (NO TAPS) FOR COMPLETE SPECIFICATIONS REFER TO NMPC SYSTEM SPECIFICATION E-1056. |
CENT. MOL N/A COOPER PWR N/A ABB T&D N/A |
| 1690556 |
1 |
7,338.90 |
TRANSFORMER, THREE PHASE, DEAD FRONT, 1000 KVA PAD MOUNTED RATIO. 13200 Y/7620 - 4800V (NO TAPS). FOR COMPLETE SPECIFICATIONS REFER TO NMPC SYSTEM SPECIFICATION E-1061. |
GE N/A ABB T&D N/A |
| 2012203 |
33 |
22.00 |
VAULT-PAD, TRANSFORMER COVER VAULT PAD-STEEL HOT DIPPED GALVANIZED DIAMOND PLATE STEEL COVER (28 IN. X 14 IN. X 3/16 IN.) IN ACCORDANCE WITH N.M.P.C. DWG. A-27619-S. FOR USE WITH CONCRETE VAULT PAD ITEM UR9A. (DELETED FROM STANDARDS USE UP EXISTING STOCK) |
|
| 2012206 |
22 |
54.40 |
VAULT-PAD, FILLER PLATE, FIBERGLASS, 42 1/4 IN X 37 IN X 11/16 IN THICK FIBERGLASS REINFORCED PLASTIC, FURNISHED WITH MOUNTING HARDWARE, ONE 5/16 IN X 2 1/4 IN -16 UNC STAINLESS STEEL BOLT AND ROUND WASHER, ONE 3/8 IN X 1 3/4 IN -16 UNC STAINLESS STEEL FLAT HEAD MACHINE SCREW, (DELETED FROM STANDARDS USE UP EXISTING STOCK) |
|