Heavy Equipment
Return to Power Plant Index

 


3/8/3017
Cleaver Brooks Water Tube Boilers for Sale.    (3) Boilers, 100,000 lbs/hr steam each (2900 HP).    Water tube boilers, new in 1991.     260 psi, operated at 150 psi.    Added low Nox burners and economizers in 2014.     Meets current codes.
    (Click here for images.)   Milt Fyre 503-351-9898 or milt@rmaglobal.com 
3/25/2016
Boom  1973 Manitwoc 4000 175 ton  216' Boom tubular , 3rd drum  Price $140,000 fob TX  
    (Click here for image.)   Milt Fyre 503-351-9898 or milt@rmaglobal.com
3/25/2016
CAT 988 with Forks for sale 55000lbs. at 48" LC capacity Sideshift Fork positioner Slope pyler 10' forks (4.5" x 10.0" x 120" ) 36' chassis length 12' chassis width 14' mast lowered height 12' load lift height 109.5" carriage overall width 106" out to out on forks Price $165,000 fob OH.
    (Click here for images.)      Milt Fyre 503-351-9898 or milt@rmaglobal.com   
3/25/2016
Taylor Container Handler for sale: Taylor TEC950L Container Handler, Cummins Diesel, Built 1993, Stacks 4 High, 80,000# Capacity.    Disassembled and ready to be shipped via low-boy and 2 flatbeds. For trucking, 12 ft. wide; body weighs 81,000#     FOB NW coast USA. Ready to ship.   Asking   $125,000.   (Click here for images.)      Milt Fyre 503-351-9898 or milt@rmaglobal.com   

Listed 1/28/2016     **************************   SOLD     SOLD    SOLD  **************************************************
Water Purification (desalinization, sea water purification-reverse osmosis)  Plants for sale.  2 new units available.   New  Each Seawater Plant will produce 250,000 gallons of pure water per day (USA specs).     $630,000 each.     (Click here for more details and images.)    Contact Milt Fyre  503-351-9898 or milt@rmaglobal.com  
1/17/16
1991 TAYLOR TEC950L Container Handler 4 high, 80,000lb. Loader on your truck $140,000.     Images available on request.    Milt Fyre 503-351-9898 or milt@rmaglobal.com  

1/17/16
2003 Hoist P300S SN: 27689, 30,000lb capacity, 6 cylinder Cummins engine w/ 3190 hours, 144" fork height, enclosed cab, A/C and heat, three speed Dana power shift transmission, load sensing hydraulic system, side shifting forks, good mechanical condition,$56,000 fob TX  Images available on request.    Milt Fyre 503-351-9898 or milt@rmaglobal.com  

1/17/16
Hyster 2006 Forklift H550F Forklift for Sale.   55,000 lb cap @ 48" LC,   124" lifting height, 155" lowered height,   4702 hours,   Sideshift, fork positioner,   96" forks, Diesel power, powershift transmission,  Enclosed cab, lights, wiper,   Pneumatic tires,   Includes coil ram, Very good mechanical condition and appearance.   Asking $248,000 FOB PA.   Images available on request.    Milt Fyre 503-351-9898 or milt@rmaglobal.com   

1/7/16
Caterpillar T300 30M Forklift Truck for Sale. Used 4,125 hours. 30,000 lb. 240 Horse Power. One owner since new. Well maintained, all service records.    Asking $49,900.    Images available on request.    Milt Fyre 503-351-9898 or milt@rmaglobal.com  

1/7/16
Taylor Yardster TE4030 (Lift truck) 453 GM Diesel Engine C-28,     3 speed Transmission,    PRLC 1756 Drive Axle,    Air Brake System,    12:00x20 16PR Foam Filled Goodyear drive and steer tires,   
102" Telescopic Type "C" Carriage,    I-1-18-4335 3.5"x10"x96" Forks PTX Purifier,    Work Lights Rotating Amber Beacon,    Backup Alarm,   Rear View Mirrors.    Certified Boom - Boom Rack/Carrier Extra counter weight.    The unit is currently set up to lift 50,000 lb.    With counter weight it can lift 60,000 to 65,000.    Asking   $110,000.   Images available on request.   Milt Fyre 503-351-9898 or milt@rmaglobal.com  

1/7/16
Reachstacker for Sale   2006 Kalmar Reachstacker  Model  DRF420-60S5  Well maintained.    Asking $200,000 FOR East Coast.   6,500 hours.   
Images available on request.   Milt Fyre 503-351-9898 or milt@rmaglobal.com   
4/29/2014
Sisu Terminal Tractors- 110" wheelbase  75.0: back of cab to center of 5th wheel in full up position  16.0" 5th wheel l  PRICE: $26,500 FOB Northwest  (click here for details and images.)  DELIVERY: STOCK AVAILABLE IMMEDIATELY   Milt Fyre 503-351-9898 or milt@rmaglobal.com   
4/29/2014
Kalmer Reach Stacker  DRF450 65S5  2006   It has 3,100 Original Hours. Price is $ 340,000 and this includes tear down and loaded onto trucks. Price on new unit is $475,000 with 20-22 weeks lead time.  Milt Fyre 503-351-9898 or milt@rmaglobal.com   
4/29/2014
FANTUZZI 2002  Fantuzzi Empty.  It works well 7/8 high lift,  20/40 spreader,  Cummins 8.3 engine, Clark trans, a/c,  17,890 hours,  good rubber.
Price $85,000  knocked down and loaded. Milt Fyre 503-351-9898 or milt@rmaglobal.com   
4/8/2014
FANTUZZI Container Handler - 2003 Model FDG500.   Up to 5 containers high.  Approximately 88,200 lbs. lift capacity,  330 HP Cummins Diesel engine QSM11,    Rockwell Drive Axle,   Powershift transmission with torque converter,   disc brakes.  East Coast.  (Click here for images)  Asking $125,000.  Milt Fyre 503-351-9898 or milt@rmaglobal.com   
10/23/2013
OKUMA Lathe Model   LB1511 for sale.    Asking $40,000  Milt Fyre 503-351-9898 or milt@rmaglobal.com 
5/17/2012
6000kW Natural Gas Hot Water Boiler for Sale.   This new, unused hot water boiler was made Viessmann in 1997 and never put into service. It a Turbomat 18032-16.   It is a Weishaupt snigle burner type RGL 70/2-A. vRating 1000-10.500 kW, gas type N, max. 500 mbar, pressure min. 15 bar, cap. 160-881 kg/h.   Located in the UK. (Click here for images.)   For price contact Milt Fyre 503-351-9898 or milt@rmaglobal.com 
4/25/2012
  ******************  sold  **************************************************
Raymond 453 Bowl Mill Pulverizer Crusher  For Sale    4400 lbs/hr at -200M     (Click here for images.)   Call for price.   Contact Milt Fyre 503-351-9898 or milt@rmaglobal.com  
Listed
1/10/2012
Okuma Crown CNC Lathe for Sale.   Used, Manufactured 1997   Asking $50,000  (Click here for details and images.)   Contact Milt Fyre  503-351-9898 milt@rmagloba
l
.com   

Listed
1/3/2012
CNC Equipment/Machines for sale, Okuma CNC Lathes,  Late Models:   (Click here for details and images.)   Contact Milt Fyre  503-351-9898 milt@rmagloba.com  

OKUMA MX-60HB HORIZONTAL MACHINING CENTER OSP 7000 CNC
OKUMA LB-45 SUPER BIG BORE CNC LATHE w/ 10" HOLE Okuma OSP P-200 CNC
CINCINNATI LANCER 2000 VERTICAL MACHINING CENTER, Fanuc 18iM CNC
KITAKO VT4-350 4-SPINDLE VERTICAL CNC LATHE W/ TWIN TURRETS Fanuc 18TB CNC
36" x 120" AMERICAN 3220W HEAVY DUTY CNC LATHE Fagor 8055 TC CNC
22" x 72" CINCINNATI 300MT-1800 CNC LATHE W/ LIVE TOOLING Acramatic 850SX CNC
Okuma Macturn 350W 2SC-1500 Multi Axi
Okuma LU-25 - 1000
Okuma Captain L-470 Big Bore, Okuma Captain L-370 Big Bore
Okuma LU-15 Big Bore with Robot and Parts Carousel
Okuma LU-15  


 

Return to Power Plant Index
Return to Main Index



sales@rmaglobal.com   Phone:(503) 351-9898     Copyright 1995-2017: RMA Inc.